MIDI Legato Pedal
The MIDI Legato pedal utilizes:
- a stereo jack-socket, which also acts as the on/off switch,
power-on LED, 9 volt battery connector
- a 4-way DIP switch which selects the MIDI channel at power-on, shown
in Table 1
- a MIDI 5-pin DIN output socket. See Circuit
Diagram.
The MIDI sustain pedal kit requires:
Legato Pedal:
When the legato pedal is pressed, sending out controller value CC68 with a
value of 127, playing a different note changes the pitch of the current note
without re-triggering the attack phase of the envelope of the sound. When the
pedal is released it sends out controller value CC68 with a value of 0.
|
DIP Switch Selections |
MIDI Channels |
| 4 |
3 |
2 |
1 |
| on |
on |
on |
on |
1 |
| on |
on |
on |
off |
2 |
| on |
on |
off |
on |
3 |
| on |
on |
off |
off |
4 |
| on |
off |
on |
on |
5 |
| on |
off |
on |
off |
6 |
| on |
off |
off |
on |
7 |
| on |
off |
off |
off |
8 |
| off |
on |
on |
on |
9 |
| off |
on |
on |
off |
10 |
| off |
on |
off |
on |
11 |
| off |
on |
off |
off |
12 |
| off |
off |
on |
on |
13 |
| off |
off |
on |
off |
14 |
| off |
off |
off |
on |
15 |
| off |
off |
off |
off |
16 |
|
Table 1 MIDI Channels |
|
MIDI Legato Pedal Board
|
TOM SCARFF
1 Martello Court
Portmarnock
Dublin
Ireland.
Email: tscarff@eircom.net
|
